Products | Video Infrastructure MediaCento IPX Extend HDMI video over an IP network to as many as 250 distant screens — or to video walls! • A digital solution for the future at an analog price! • Uses existing standards-based Ethernet technology and TCP/IP protocols. • Virtually no distance limitations. Can go as far as your network reaches. • Three versions to choose from: multicast, multicast for video walls, and unicast. • All versions provide very high image quality with visually lossless compression. • HDCP compliant and Blu-ray ready, and feature EDID copy function. • Support serial connections to switch screens on/off. • STANDARD WARRANTY — 1 Year • EXTENDED WARRANTY — Add 1 or 3 Years Standard multicast version. This IP streaming solution multicasts HDMI video and audio to up to 250 screens on a LAN. You need just one VX-HDMI-IP-MTX transmitter plus a VX-HDMI-IP-MRX receiver for each screen. Because the extender units install directly into an existing LAN, integration is easy. The extender transmits up to 100 m per link but goes even longer when additional network switches are added to the mix. Its signal is completely digital from end to end, so your digital content is never compromised. Typical application for VX-HDMI-IP-MTX/MRX version: Digital Displays iCOMPEL™ Digital Signage Appliance MediaCento IPX Multicast Receivers (VX-HDMI-IP-MRX) MediaCento™ IPX Multicast Transmitters (VX-HDMI-IP-MTX) Layer 3 Switch with IGMP CATx Cables IP Layer 3 Switch with IGMP CATx Cables VX-HDMI-IP-VRX NOTE: Use multicast versions with a Layer 2 or 3 switch with IGMP. For details, call Tech Support at 030-241 77 99. CONNECTORS HDMI RJ-45 Serial CABLE Ethernet CAT5, 5e, 6 Multicast for video walls version. This offers all the features of the standard multicast version but also supports the output of a single source video to a matrix of screens, so you can project your HD content on a larger scale. The extender supports customizable monitor array sizes for any video wall setup, with multiple rows and columns. You need just one transmitter and up to 250 receivers for a customizable wall. Typical application for VX-HDMI-IP-VTX/VRX version: MediaCento IPX Multicast HDMI Cable PC Unicast version. If you need to transmit HDMI video and audio over an Ethernet network to just a single display, order this version. It extends up to 100 m but goes even longer with network switches added to the mix. The extender can be used in any existing corporate Gigabit network. CE Approval — Yes RoHS — Yes 42 Item MediaCento IPX Multicast Transmitter Receiver MediaCento IPX Multicast for Video Walls Transmitter Receiver MediaCento IPX Unicast Transmitter Receiver For specs and more information, see www.blackbox.nl Tech Support 030 - 241 77 99 | Sales 030 - 241 77 77 | On-Site Services 030 - 241 77 44 Transmitter for Video Walls (VX-HDMI-IP-VTX) CATx Cable Layer 3 Switch with IGMP CATx Cables IP CATx Cables Layer 3 Switch with IGMP Code VX-HDMI-IP-MTX VX-HDMI-IP-MRX VX-HDMI-IP-VTX VX-HDMI-IP-VRX VX-HDMI-IP-UTX VX-HDMI-IP-URX MediaCento IPX Multicast Receivers for Video Walls (VX-HDMI-IP-VRX) Each receiver scales the correct part of the picture for its wall display. To configure image output, simply access the system’s Web-based interface. Digital Displays HDMI Cables
Digital Video Extenders HD-over-IP Encoder/Decoder Extend broadcast-quality 3G-SDI, HDMI, or DVI video over a LAN IP using JPEG 2000 compression technology. CONNECTORS DVI-I HDMI SDI RJ-45 Ideal for: • Medical image distribution. • Military HD video sharing. • TV broadcast studios. • Other video recording, editing, and archival applications. VX-HDV-IP and VX-HDV-IP-HDMI • Captures, compresses, and encodes video for streaming over an IP network. • Also decodes IP signal back, decompressing it for HD output on remote screen(s). • Uses JPEG 2000 intraframe compression, ensuring every video frame is transmitted. • Delivers Full 1080p/60 Hz video over the link without noticeable loss in quality. • Modular interface. Order DVI-I/HDMI® or 3G-SDI cards for video input/output(s). • Works equally as well in either point-to-point or point-to-multipoint setups. • Multiple units can be interconnected via LANs/WANs as well as the Internet. • Extends up to 100 m— or farther by adding a network switch. • Also extends USB keyboard/mouse signals over IP to the remote end. • Supports dual redundant power input and contact closures. • HDCP compatible. Distribute video from a Blu-ray source. • EDID function for optimal display data communications. • STANDARD WARRANTY — 1 Year • EXTENDED WARRANTY — Add 1 or 3 Years Transmit high-quality video over a standard IP network for display of HD content on one screen — or multicast signals to multiple displays — with the Black Box® HD-over-IP Encoder/Decoder solution. Because it uses JPEG 2000 compression, it’s extremely efficient when encoding the signal for transmitting over a network. This way, you’re assured every single frame is transmitted without any visible loss of quality for maximizing network bandwidth and clear rendering of video. Plus, it offers very low latency. Delay is less than three frames*, which makes it ideal for streaming live video fast. The solution uses existing standards-based Ethernet technology and IP protocols to digitally transmit video (as well as multichannel audio if used with the HDMI I/O card) at maximum Ethernet distances of 100 m. To go farther, simply add a network switch or enable unlimited distances using the Internet. An Auto Stream function enables video streaming to start as soon as you connect the encoder/decoders. Connections between units are defined using simple IP addressing via a browser-based management interface, so reconfiguring video streams is easy. Order two or more base units. You’ll need to order at least two VX-HDV-IP base units with one configured as an encoder and the other as a decoder. When set up to work as an encoder, the base unit compresses the video source signal and transmits it over IP via a Gigabit Ethernet connection. The second unit, configured as a decoder, decompresses the data, and plays it back in its original form as HD video. And, as long as you have suitable LAN/WAN bandwidth, the quality of the source video is preserved. Use the two encoder/decoders to unicast video to one screen, or use three or more units to multicast to multiple screens on a LAN. Flexible modular video interfaces. Just add 3G-SDI or DVI-I/HDMI I/O Cards for your type of video. You can even mix interfaces, connecting a 3G-SDI source on the encoder side and an HDMI device on the decoder side (each I/O card has video in and out ports). For example, you can plug a 3G-SDI camera into the encoder with the 3G-SDI card and enable playback on a remote HDMI display connected to the HDMI card installed in the decoder unit. CE Approval — Yes RoHS — Yes Item HD-over-IP Encoder/Decoder Base Unit HD-over-IP Encoder/Decoder I/O Card for DVI-I/HDMI ✦ Includes (1) HDMI adapter. for 3G-SDI Also be sure to order one or more PSUs: External PSU for HD-over-IP Encoder/Decoder You may also need: 19" Rackmount Kit • Streaming video for educational and entertainment purposes. • Distributing video content via an IP network to digital signage. • Anywhere you require low video latency. TECH S PECS Audio — When using a VX-HDV-IP-HDMI or future audioonly I/O card: Channels: (16) in same direction as video; (16) in opposite direction to video; Audio sampling rate (maximum): 192 kHz; Audio coding (maximum): 32-bit, uncompressed Color Depth — 12-bit Delay — Per device (approximate): 1.5 frames (25 ms at 60 Hz); total delay (approximate): 3 frames (50 ms at 60 Hz) plus network delay Distance (Maximum) — 100 m; farther distances are possible by using a network switch Frame Rate — Maximum: 72 Hz; Minimum: 24 Hz Management — Internal Web server via browser interface Pixel Clock — Maximum: 150 MHz; Minimum: 25 MHz Video Resolution — Depending on the encoding: Maximum: 1920 x 1080p; Minimum: 640 x 480i RoHS — Yes Connectors — Network: (1) RJ-45 (10/100/1000 Mbps); KVM data: (2) USB 2.0 Type A F; Video interface: (1) slot for either VX-HDV-IP-SDI or VX-HDV-IP-HDMI I/O card (order separately); Future audio interface: (1) slot for future audio I/O card; Power: (1) 6-position terminal block for use with (1) or (2) VX-HDV-IP-PSU units (order separately) Power — 12 VDC, 13 W from (1) or (2) separately ordered VX-HDV-IP-PSU units attached to (1) 6-position terminal block; with switch contact for monitoring two power inputs (closes to signal any power failure) Size — 4.1H x 21W x 21D cm Weight — 1.3 kg without any card(s) installed NOTE: You will likely need two base units and two I/O cards for a fully functioning link (however, if you already have a software JPEG 2000 encoder solution, just one base unit with a card is needed). For power, be sure to order a PSU for each encoder/decoder or two PSUs for redundant power on a single base unit. Code VX-HDV-IP VX-HDV-IP-HDMI VX-HDV-IP-SDI VX-HDV-IP-PSU VX-HDV-IP-RM * Network delay not included. Speed and video rendering depend on quality of the video source, display(s), and cables, network bandwidth, and other factors. For more information and our online store, visit www.blackbox.nl 43 USB CABLE Ethernet CAT5, 5e, 6 PERIPHERALS Keyboard/Mouse
http://www.blackbox.nl, http://www.blackbox.nl,
AV, Multimedia, and Digital Signage Design and Sourcing Guide main