Products | Video Infrastructure Buyer’s Guide | Splitters Video Standard HDMI Solution Description HDMI Splitters with Audio Split HDMI® video and audio signals for 2, 4, or 8 outputs; feature 3.5-mm analog audio jacks for separate speaker connections. Dual-Link DVI-D Splitters Split ultra-high-resolution dual-link DVI video for output on four screens. DVI DVI Splitters with Audio and HDCP Use to split DVI signal for 2 or 4 outputs and reproduce HDCP-protected content on connected screens. 3G-SDI Splitter, 1 x 4 SDI Distribute 3G/HD/SD-SDI source video to four distant SDI screens or devices. VGA Video Splitters Use to split VGA input for 2, 4, or 8 outputs. VGA 2-/4-Port Audio/Video Splitters Splitters featuring (1) VGA–audio in and (2) or (4) VGA–audio out. 4-Port XGA Video Splitter Splits XGA signal for four screens. 2048 x 1536: VGA 1600 x 1200: VGA VGA VGA 2048 x 1536: VGA VGA 3G-SDI, HD-SDI, SD-SDI Coax 1 x 4 Splitter (VSP-SDI1X4) 2-Channel Splitter (AC1056A-2) 4-Channel Splitter (AC1056A-4) 8-Channel Splitter (AC1056A-8) 2-Port Splitter (AC650A-2) 4-Port Splitter (AC650A-4) 4-Port Splitter (AC090A) For other video splitters and broadcasters, turn to the Legacy Solutions section Also see these CATx-based signal-distribution solutions in our extenders section: MediaCento™ HX 1 x 4 Transmitter Reach multiple HD screens simply and affordably with this HDMI solution. • Splits and extends AV signals to four digital signage screens. • Uses inexpensive CAT5e/CAT6 cable for uncompressed HDMI® signal extension. • Supports single-link 225-MHz (6.75-Gbps) video bandwidth. • Transmits 1080p video as far as 40 meters. • Has local HDMI output for monitoring or cascading units. Not only does it split the signal, but it’s also a distribution amplifier that regenerates the HDMI signal for boosting video over a single solid CATx cable run. Plus, the device supports single-link 225-MHz (6.75-Gbps) bandwidth for sharp full-motion rendering, synchronized video and audio with no perceivable delay, as well as Deep Color resolutions for enhanced color depth and refresh rates. For more information, see the Digital Video Extenders section. Wizard Multimedia Extender LP 4-Port Transmitter Broadcast HD VGA video to four distant screens using line-powered receivers. • Sends maximum resolutions at a maximum distance of 150 meters. • Transmits power to receivers. Great for areas short on outlets and reducing cords at screens. • Features feedthrough port for local monitoring or cascading units. This 4-port transmitter extends VGA video as far as 150 meters using solid-conductor CATx cable. Used with separately sold receivers, the transmitter broadcasts Full HD 1080p video to four screens in four locations over copper already installed in your building. Even better, the receivers are line powered from the transmitter, so power isn’t required at the remote end. This feature makes the extender ideal for rooms where you’re short on outlets, as well as reducing the number of cords around or behind screens. For more information, see the Digital Video Extenders section. 60 Tech Support 030 - 241 77 99 | Sales 030 - 241 77 77 | On-Site Services 030 - 241 77 44 1080p: HD, 1920 x 1200: DVI 1080p: HD, 2560 x 1600: DVI 1080p: HD, 1920 x 1200: DVI HDMI DVI DVI For product details, see the following pages in this section. Maximum Resolution Media Specific Component 1 x 2 Splitter with Audio (AVSP-HDMI1X2) 1 x 4 Splitter with Audio (AVSP-HDMI1X4) 1 x 8 Splitter with Audio (AVSP-HDMI1X8) 1 x 2 Splitter (VSP-DLDVI1X2) 1 x 4 Splitter (VSP-DLDVI1X4) 1 x 2 Splitter (AVSP-DVI1X2) 1 x 4 Splitter (AVSP-DVI1X4) 1 x 8 Splitter (AVSP-DVI1X8)
Video Splitters HDMI Splitters with Audio Affordable splitters for duplicating digital video from one source on as many as eight HDMI displays. • Split an HDMI® signal between two, four, or eight outputs simultaneously. • Provide accurate video reproduction without distortion and attenuation. • Distribute audio via the HDMI ports or separate 3.5-mm analog audio jacks. • Blu-ray ready for HD display. • STANDARD WARRANTY — 1 Year • EXTENDED WARRANTY — Add 1 or 3 Years Split and distribute HDMI video plus audio from a set-top box, PC, or other HDMI source device to eight digital screens. These devices split a source between two, four, or eight outputs simultaneously without signal loss. Resolution (Maximum) — PC: WUXGA (1920 x 1200): HDTV: 1080p (1920 x 1080) CE Approval — Yes RoHS — Yes Connectors — Input: (1) HDMI F; (1) 3.5-mm audio; Output: (2), (4), or (8) HDMI F; (2), (4), or (8) 3.5-mm audio Power — Input: 100 – 240 VAC, 50 – 60 Hz, autosensing; Output: 9 – 12 VDC; NOTE: The quality of output depends largely on quality of source, HDMI cable, and display. Dual-Link DVI-D Splitters Easily split dual-link DVI without any loss in video quality. • Reliably and accurately duplicate dual-link DVI-D video. • Ideal for digital signage, classroom and conference presentations, studios, or any video broadcasting application. • Supports resolutions up to 2560 x 1600. • Feature electrostatic discharge (ESD) protection. • Wallmountable, durable metal chassis. • STANDARD WARRANTY — 1 Year • EXTENDED WARRANTY — Add 1 or 3 Years DVI Standard — DVI 1.1 Input DDC Signal — 5 volts (peak-to-peak, TTL) Input TMDS Signal — 1.2 volts (peak-to-peak) Video Bandwidth — 300 MHz CE Approval — Yes RoHS — Yes Connectors — Video input: (1) DVI-I F; Video output: (2) or (4) DVI-I F; Serial: (1) DB9 F (RS-232 for firmware updates) VSP-DLDVI1X2 VSP-DLDVI1X4 Use our affordable Dual-Link DVI-D Splitters to transmit dual-link video (ultra high-resolution video up to 2560 x 1600) from a DVI source to four screen locations without any loss in quality. These distribution amplifiers enable you to output DVI 1.1-compliant source video on two or four DVI screens simultaneously for video sharing. TECH S PECS Power — Input: 100–240 VAC, 50–60 Hz, 0.6 A; Output: 5 VDC, 4 A; Consumption (maximum): 20 watts Size — VSP-DLDVI1X2: 2.5H x 20.8W x 5.6D cm; VSP-DLDVI1X4: 4.6H x 21.8W x 10D cm Weight — VSP-DLDVI1X2: 0.4 kg; VSP-DLDVI1X4: 0.7 kg For more information and our online store, visit www.blackbox.nl Item Dual-Link DVI-D Splitters 1 x 2 1 x 4 Code VSP-DLDVI1X2 VSP-DLDVI1X4 ✦ Both include (1) splitter, (1) power supply, and (2) mounting screws. 61 The splitters make it easy to show a video presentation on multiple screens. They’re also great for digital signage applications. The splitters offer simple, plug-and-play installation. Just plug in DVI cables into dual-link DVI ports and connect your screens. A DIP switch enables EDID learning. CONNECTORS DVI-D AVSP-HDMI1X8 Simply connect HDMI cables, power up the system, and you’re ready to duplicate video. You can also cascade multiple units to broadcast to additional screens. The splitters support HDMI display resolutions of up to UXGA (1600 x 1200), WUXGA (1920 x 1200), or Full HD 1080p (1920 x 1080). High bandwidth enables you to transmit information at high speeds. TECH S PECS Consumption: AVSP-HDMI1X2: 2.8 W; AVSP-HDMI1X4: 4.1 W; AVSP-HDMI1X8: 10.2 W Size — AVSP-HDMI1X2: 2H x 17.8W x 8.6D cm; AVSP-HDMI1X4: 4.5H x 22.1W x 13.7D cm; AVSP-HDMI1X8: 4.5H x 44W x 18D cm Plus, they’re fully HDCP compliant and support EDID display information. Because they feature separate 3.5-mm jacks for distributing audio on each channel, the splitters are ideal for applications where, instead of the HDMI audio capabilities of the connected displays, you want to use existing high-power speakers and high-fidelity audio receiver equipment for audio output. Item HDMI Splitters with Audio 1 x 2 1 x 4 1 x 8 Code AVSP-HDMI1X2 AVSP-HDMI1X4 AVSP-HDMI1X8 ✦ 1 x 8 model also includes (1) rackmount kit. To connect to DVI devices, order… HDMI Male to DVI Female Adapter FA790 HDMI Male to DVI Male Adapter FA795-R2 CABLE Native CONNECTORS HDMI Audio CABLE PERIPHERALS Native Speakers Separate 3.5-mm jacks for audio!
http://www.blackbox.nl,
AV, Multimedia, and Digital Signage Design and Sourcing Guide main