...Possible causes: • Bad cable or cable that’s too long, causing either the video signals or EDID/HDCP control signals not to be transmitted properly. Make sure that you use quality, high-speed HDMI® cables—they don’t even have to be expensive ones—o...
IP-Based A/V Distribution • IP-Based A/V Distribution • IP-based distribution technologies use transmitters and receivers to extend signals over a TCP/IP network (a LAN or even a WAN, for instance). Oftentimes, they’re called IP streamers when...
...etc. S/PDIF is based on the professional AES3 interconnect standard. • S/PDIF signals are carried over two types of cables. The first is a 75-ohm coaxial cable with orange RCA connectors. The second is a fiber cable with TOSLINK connectors.
...Each path travels across a 2-wire differential pair, and the bus contains four signal lines per channel. Fewer interface signals means the interconnect cable requires less board space. • Thinner cables • Serial ATA also uses thinner cables (no ...
...Ethernet, power over cable, and various control signals through a single LAN cable. This is referred to as 5Play™, a feature set that sets HDBaseT technology above the current standard. • Video • HDBaseT delivers full HD/3D and 2K/4K uncompressed...
Common display configurations • Common display configurations • Individual video screens • The most common digital signage application is individual video screens displaying information. Often multiple screens in various locations are networke...
...loop is a current across a conductor, created by a difference in potential between two grounded points, as in two buildings connected by a run of RS-232 or other data line. When two devices are connected and their potentials are different, volt...
...to fibre and run cablesacross an extra-long distance-up to 50 kilometres or more! • Have an Ethernet switch with RJ-45 ports? No problem! Use a converter to attach legacy AUI and BNC or new fibre segments. • What are Media Converters? • Medi...
Shopping Basket
Sign in
