Newsletter
The Black Box website uses cookies.
By continuing the use of the Black Box website, or by pressing the agree button on the right, you consent to the use of cookies on this website. Meer informatie.
Navigatie
 
Fan-out kits

Fan-out kits


What is Furcation?

Furcation is the process of adding protective tubing to each fibre within a loose-tube cable. It can be a headache-inducing task if you don’t have the right tools. If you bend the cable or buffer tubes past their recommended bend radius, or if you allow them to kink, you’ll end up with substandard cable connections and splices that can break down over time. And, if the cable is outdoors, it can become exposed to the elements. The end result: a damaged cable and less-than-optimal transmission performance.


A Fan-out kit is an absolute Must during Furcation

That’s why a fan-out kit is an absolute must during furcation. These kits enable you to branch out the fragile fibre strands from a buffer tube into protective tubing so you can add a connector. And, you can do it without using splicing hardware, trays and pigtails.


Seperate Fibres

To separate the fibres, use the kit’s fan-out assembly, which is colour-coded to match the fibre colour scheme. The assembly protects the cable’s bend radius. It also eliminates excessive strain on the fibres by isolating them from tensile forces.


Different types of Fan-out Kits

Several types of fan-out kits are available for both indoor and outdoor cross-connects. The outdoor kits include components that compensate for wider temperature fluctuations. Some kits are used to terminate loose-tube cables with 6 or 12 fibres per buffer tube. Others enable you to furcate and terminate more than 200 loose-tube cable fibres, sealing the cable sheath and providing a moisture barrier at the point of termination. These kits require no additional hardware.


Terminate Loose-tube Cable

Although it‘s recommended that you terminate loose-tube cable at a patch panel, that might not always be possible. For this, there are ”spider” type fan-out kits, which affix a stronger tubing to the bare fibre. The tubing is typically multilayered, consisting of an inner tube that holds the individual fibre, an aramid yarn strength member and an outer protective PVC jacket. Once you strip back the cable jacket, you thread the fibres into the fan-out inserts.



Learn more:
Fibre Optic Mode-Conditioning Cable.

 
Share |