Foto kan afwijken van werkelijk product
|
|
|
|
|
|
Accessoires
Further Highlights
• Integrates with Microsoft® MS Server 2008 R2 SP1 and Microsoft Hyper-V Server 2008 R2 SPJ for RDP 7.1/8 and Remote FX.
• Single- and dual-head DVI video options.
• Maximum resolution up to 1920 x 1200.
• Compact fan-less design: 162x110x32 mm improves ergonomics at the user desk.
Connectivity to Virtual Machines
The InvisaPC™ bridges the gap between IP-based KVM extension and switching applications and access to virtual machines. Use an InvisaPC receiver as a direct portal to virtual machines, especially Microsoft RDP 7.1 and RDP 8, to redirect digital video, USB keyboard and mouse, audio and vUSB to distant users over IP.
The InvisaPC requires a host with an operating system and associated Client Access Licenses (CALs). However, the InvisaPC doesn’t require any drivers or software to be installed on computers. This hardware-based solution is plug-and-play, directly connecting to the network interface right out of the box.
Traditional Point-to-Point Extension over IP
With the InvisaPC solution, computers are removed from the desktop and are relocated within a secure, climate-controlled equipment room connected to an InvisaPC transmitter. Each user has his/her own keyboard, monitor, mouse, and peripheral setup connected to an InvisaPC receiver delivering a high performance real time experience. It’s just like running any application on a local CPU without any performance issues.
The clients and the back-racked servers are connected via standard LAN or WAN infrastructure. The bandwidth requirements of the system are very low. For example, with the InvisaPC, transmitting a 1080p movie only requires 35-Mbps bandwidth. The low bandwidth requirements even allow an extension over the Internet with very low latency or sharing even corporate networks without utilizing too much bandwidth.
Flexible Extension
Connected to a Virtual Machine, one InvisaPC receiver supports up to 16 RDP, RDP7.1/8 targets. The same receiver can also be connected with up to 16 InvisaPC transmitters/servers. That way each InvisaPC receiver supports switching between 32 soft and hard targets. The settings can be copied from one receiver to another to ease the setup, while user profiles may be configured on the receiver to restrict targets. Multiple receivers may be used to create a matrix switch via the network, too without any management requirements.
Adapts to growing needs.
InvisaPC can easily be adapted to meet your requirements. Start with a small switching system that enables one user access to different computers and virtual machines. Gradually, the system can be expanded into a switching matrix. Future management software will also allow larger switching matrices, as well as integration into existing network authentication systems such as LDAP or Active Directory.
Flexible remote access ensures a convenient working environment.
The clients operate extremely quietly — no fan noise to distract users from their work. The power consumption is about 3 watts per unit which, compared to a desktop PC, is 100 times more energy efficient. The InvisaPC client, with its space-saving design, can even be mounted behind the monitor screen. Moving to cloud computing with a zero client device like the InvisaPC enables IT managers to make their department more flexible and responsive.
Soft migration from real to virtual machines.
The InvisaPC solution provides the ability of a smooth migration from real desktops towards a virtual server landscape. The system provides integrated support for back-racked PCs and virtual desktops. In particular the design addresses applications with a mix of both worlds — without changing the front end for the user. Desktop virtualization is deployed through a PC or server that hosts multiple virtual desktops. The workstations can be running Mac®, Linux®, or Microsoft® operating systems using an InvisaPC transmitter. With an InvisaPC transmitter, the system supports digital video, digital audio, and USB peripheral extension across IP networks. It is standards-based, so there are no upgrades to equipment, software licensing, or remote management —plus, no time-consuming IT visits.
Real cost savings.
InvisaPC optimizes cost-effective deployments by basing the scale of the deployment on the solution need. It can be scaled from branch offices to large enterprise corporations. Plus, lower power consumption translates into lower utility bills for you.
Remote FX Software Requirements-
Parent Requirements:
Microsoft® MS Server 2008 R2 SP1, Microsoft Hyper-V Server 2008 R2 SPJ, Microsoft Server 2012
Citrix XenServer with support for RemoteFX and legacy RDP nodes,
VMWare ESX - only legacy mode operations
Supported Guests:
Windows 7 SP 1, Windows 8
Supported Clients:
RDP 7.1, RDP 8.0, Legacy RDP in non-RFX mode
OS needs to be able to support USB HID drivers
For traditional KVM:
Microsoft Windows Vista, XP, Windows 7, Windows 8, Server 2003, Server 2008, Server 2012, Linux, Solaris, Mac OS
Network - 10/100/1000Mbps RJ-45
Security - SSLAES 128 bit encryption
Resolutions (max.) - 1920 x 1200
Leads Supported — DVI-D video, USB keyboard, mouse and peripherals, USB audio
Connectors -
Receiver DTX1000-R:
(1) RJ-45 Link
(1) DVI-D F Video
(4) USB Type A
(2) 3.5-mm Audio jacks (microphone/headset)
(1) barrel connector (power)
Receiver DTX1002-R:
(1) RJ-45 Link
(2) DVI-D F Video
(4) USB Type A
(2) 3.5-mm Audio jacks (microphone/headset)
(1) barrel connector (power)
Transmitter DTX1000-T:
(1) RJ-45 Link
(1) DVI-D F Video
(1) USB Type B
(1) barrel connector (power)
Transmitter DTX1002-T
(1) RJ-45 Link
(2) DVI-D F Video
(1) USB Type B
(1) barrel connector (power)
Indicators Receiver: (1) power LED, (1) or (2) RJ-45 Link LEDs
[b]power - 100-240VAC, 50-60Hz 20W external power supply, consumption 6,5W with keyboard/mouse attached; Output: 5 VDC, 0.9A max.
Size - each units: 163.5W x 110D x 35H mm
Weight - each unit: 0.4 kg
Approvals — [b]CE, RoHS, FCC, TUV, UL# E215890
[b]Temperature — Operating: 0ºC to 35ºC, Storage -20ºC to 60ºC
Operating Humidity — 5 to 95% non-condensing
DTX1000-T
(1) Single-head transmitter
(1) Power supply
(1) Power cord
(4) Rubber feet
Quick start guide
DTX1000-T-KIT: also
(1) DVI/USB CPU cable, 1.8m
DTX1002-T
(1) Dual-head transmitter
(1) Power supply
(1) Power cable
(4) Rubber feet
Quick start guide
DTX1002-T-KIT: also
(1) DVI/USB CPU cable, 1.8m,
(1) DVI-D male to DVI-D male cable, 1.8m
DTX1000-R
(1) Single-head receiver
(1) Power supply
(1) Power cord
(4) Rubber feet
(1) Quick Install Guide
DTX1002-R
(1) Dual-head receiver
(1) Power supply
(1) Power cable
(4) Rubber feet
(1) Quick Install Guide
DTX1032-R
(1) Single-head receiver
(1) 5 VDC power supply
(1) Power cord
(4) Rubber Feed
(1) Quick Install Guide
DTX1000
(1) Single-head transmitter
(1) Single-head receiver
(1) DVI/USB CPU Cable, 1.8m
(2) Power supplies
(2) Power cords
(8) Rubber feet
(1) Quick Install Guide
DTX1002
(1) Dual-head receiver
(1) Dual-head transmitter
(2) Power supplies
(2) Power cables
(8) Rubber feet
(1) Quick Install Guide
DTX1003
(1) Single-head transmitter (DTX1000-T)
(1) InvisaPC Manager (DTX1032-R)
(2) Power supplies
(2) Power cords
(8) Rubber feet
(1) Quick Install Guide
|
|
Live chat
Acties
Datasheets
Technical data sheet (english)
Handleidingen
Quick Install Guide DTX1000-R
Quick Install Guide DTX1000-T
Quick Install Guide DTX1002-R
Quick Install Guide DTX1032-R
Quick Install Guide System
Quick Start Guide
V2
14-sep-2017
Catalogus
E-mail een vriend
|