Foto kan afwijken van werkelijk product
|
|
|
|
|
|
Wilt u een offerte? Geen probleem!
Voeg de producten toe aan uw winkelwagen en selecteer 'Verzoek om offerte'
Accessoires
Wilt u een offerte? Geen probleem!
Voeg de producten toe aan uw winkelwagen en selecteer 'Verzoek om offerte'
- IP30-rated, fanless housing.
- Plug-and-play setup.
- Built-in smart alarm warns of power or port failures.
- LEDs indicate power, alarm, speed, and link/activity.
- DIN rail or wall mount.
Compact industrial gigabit Ethernet switch with 4 10/100/1000 Mbps RJ45 PoE+ ports and 1 SFP port. The 4 RJ45 ports support 802.3at PoE+, power sourcing equipment up to 30W per port. The SFP interface supports 100/1000 Mbps fiber SFPs. Typical applications include IP security camera and wireless access point backhaul. The switch is ideal for security/suveillance or for enabling WLAN in challenging environments such as distributon centers or warehouses. These heavy-duty switches feature an extended operating temperature range. Their rugged metal cases serve as heat sinks to dissipate heat, so there are no fans to go bad. The case is sealed to resist environmental contaminants such as dust, dirt, moisture, smoke, and insects. They're an ideal choice for demanding industrial applications such as factory floors. This switch delivers line rate, non blocking throughput with a 2K MAC address table. Ports are autonegotiating for speed and half/full duplex and include LED indicators to view port status. This unmanaged switch is plug and play and does not require any configuration.
Reliable and scalable.
The very reliable LIG401A Industrial Ethernet Switch, (4) 10/100/1000-Mbps, (1) GE SFP, is designed for the far edges of your network. Use it in harsh, indoor environments with temperature extremes of -40° to +75°C, such as loading docks or monitoring stations. This rugged switch comes in an IP30-rated enclosure that can be DIN-rail or wall mounted.
The Gigabit Ethernet SFP port gives you networking flexibility and scalability. You can extend your network over multimode or single-mode fiber at distances up to 80 kilometers, depending on the SFP you choose. Black Box SFPs are recommended.
For redundancy, the switch has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. In addition, an alarm will alert you in case of a power failure.
PoE+ PSE.
The switch is ideal for powering PDs such as security cameras, wireless access points, building access devices, and automation equipment in harsh environments. It's particularly useful for powering devices in hard-to-reach locations with limited access to AC power outlets, such a ceilings, closets, loading docks, factory floors, and more.
A multitude of applications.
This switch can be used in a wide variety of applications, such as:
- Security and surveillance, particularly to backhaul IP security camera data.
- Military applications, especially in ships and other vehicles.
- Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
- Oil and gas fields or remote equipment monitoring and control.
- Building automation for controlling HVAC and lighting systems.
Approvals: CE; FCC Part 15; CISPR 22 (EN55022) Class A; IEC61000-4-2, -3, -4, -5, -6 (Level 3); RoHS (Pb free); WEEE compliant; IEC60068-2-6, -27, -32
Connectors: (4) RJ-45, 10/100/1000-Mbps, auto-negotiation, MDI-MDI-X auto-crossover; (1) 100/1000BASE SFP slot
Dimensions: 5.4”H x 1.1”W x 4.2” D (13.9 x 2.9 x 10.7 cm)
Environmental: Storage: -40 to +185°F (-40 to +85° C)
Flow Control: IEEE 802.3x full-duplex, Back-pressure half-duplex
Humidity: 5 to 95% non-condensing
Jumbo Frames: 9K bytes
MAC Addresses 2K
Operating temperature: -40 to + 75°C (-40 to 167° F )
PoE: IEEE 802.3 af PoE; IEEE 802.3at PoE+
Power Input: Redundant terminals, reverse power protection; 12-58 VDC; PoE: 48-58 VDC; PoE+: 54-58 VDC
QoS: IEEE 802.1p, 4 queues per port
Traffic Shaper: Port-based Port shaping
Weight: 320g
TAA compliant — YES
Datasheets
Industrial Gigabit Ethernet PoE+ Switch - Extreme Temperature, 5-Port Datasheet
rev2
Handleidingen
|